TREAD SAFE

How to apply For porcelain, steel, and cast-iron tubs, clean tub surface with non-abrasive scouring powder and warm water. For fiberglass, ABS and other plastic tubs, clean surface according to manufacturer’s instructions. Warning: Do not use liquid or aerosol cleaners to prepare surface or tub treads will not adhere properly.Rinse thoroughly. Allow the tub to dry,Arrange tub treads in the tub with the backing in place to determine ideal positioning. Position tub treads at least one to three inches apart for better surface coverage.Remove backing from tub tread and apply one at a time to tub surface.Press tub tread evenly on the tub surface and try to avoid stretching.Repeat steps 4 and 5 with additional tub treads until all the tub treads are applied.Allow the tub treads to stand for at least 12 hours before using tub or shower. How to remove Lift corner of tub tread with finger nail, wood or plastic scraper. Warning: Do not use metal, glass, or other abrasive scraper to remove.Slowly Peel back tub treads until removed.If any adhesive residue remains, clean with aerosol stain remover.Allow to soak for 15 minutes and wipe with a dry rag. Repeat as necessary.Rinse thoroughly. Allow the tub to dry.